Contributed by jj on from the kung-fu-brandon dept.
The pandaboard is a development board with an ARM Cortex-A9 (dual-core at that!), 1G RAM and sports a large amount of connectors and ports.
Brandon has been working on it with help from Dale Rahn, miod@ and Patrick Wildt to get it to boot OpenBSD up to multiuser state.
The mandatory dmesg pr0n goes here:
As seen from the dmesg, there is a large amount of device drivers left to get working, but getting this far shows a lot promise that it will soon join the ranks of supported hardware platforms on OpenBSD.OpenBSD/beagle booting ... arg0 0x0 arg1 0xae7 arg2 0x80000100 atag core flags 0 pagesize 0 rootdev 0 atag revision 00000020 atag mem start 0x80000000 size 0x40000000 atag cmdline [sd0i:/bsd.umg] bootfile: sd0i:/bsd.umg bootargs: memory size derived from u-boot bootconf.mem.address = 80000000 pages 262144/0x40000000 Allocating page tables freestart = 0x0230d000, free_pages = 531699 (0x00081cf3) IRQ stack: p0x83fd1000 v0xc3fd1000 ABT stack: p0x83fd0000 v0xc3fd0000 UND stack: p0x83fcf000 v0xc3fcf000 SVC stack: p0x83fcd000 v0xc3fcd000 Creating L1 page table at 0x83ffc000 Mapping kernel Constructing L2 page tables undefined page pmap [ no symbol table formats found ] board type: panda Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.2-beta (GENERIC) #62: Wed Jul 11 14:45:11 EDT 2012 email@example.com:/home/knowmercy/src/sys/arch/beagle/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1015771136 (968MB) mainbus0 at root cpu0 at mainbus0: ARM OMAP3530 rev 2 (ARMv7 core) cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu0: 32KB(32b/l,4way) I-cache, 32KB(32b/l,4way) wr-back D-cache omap0 at mainbus0: PandaBoard ampintc0 at omap0 nirq 160 amptimer0 at omap0: tick rate 488281 KHz omdog0 at omap0 rev 0.0 omgpio0 at omap0 rev 0.1 omgpio1 at omap0 rev 0.1 omgpio2 at omap0 rev 0.1 omgpio3 at omap0 rev 0.1 omgpio4 at omap0 rev 0.1 omgpio5 at omap0 rev 0.1 ommmc0 at omap0 sdmmc0 at ommmc0 com0 at omap0: ti16750, 64 byte fifo com0: console /dev/ksyms: Symbol table not valid. scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0:
SCSI2 0/direct fixed sd0: 15193MB, 512 bytes/sector, 31116288 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets boot device: sd0 root on sd0a (82a2431cc46625f9.a) swap on sd0b dump on sd0b WARNING: CHECK AND RESET THE DATE! Automatic boot in progress: starting file system checks. /dev/rsd0a: file system is clean; not checking setting tty flags pf enabled starting network starting early daemons: syslogd pflogd. starting RPC daemons:. savecore: /bsd: kvm_openfiles: /bsd: No such file or directory checking quotas: done. kvm_mkdb: can't open /dev/ksyms kvm_mkdb: can't open /bsd: No such file or directory clearing /tmp starting pre-securelevel daemons:. setting kernel security level: kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files. /etc/rc: /usr/libexec/vi.recover: No such file or directory starting network daemons: sshd sendmail(failed) inetd sndiod. starting local daemons: cron. Wed Jul 11 13:09:11 MDT 2012 OpenBSD/beagle (noname.my.domain) (console) login: root Password: Last login: Tue Jul 10 16:36:15 on console OpenBSD 5.2-beta (GENERIC) #62: Wed Jul 11 14:45:11 EDT 2012 Welcome to OpenBSD: The proactively secure Unix-like operating system. Please use the sendbug(1) utility to report bugs in the system. Before reporting a bug, please try to reproduce it with the latest version of the code. With bug reports, please try to ensure that enough information to reproduce the problem is enclosed, and if a known fix for it exists, include that as well. You have mail. #
(Comments are closed)